| PART |
Description |
Maker |
| LA47503 |
High-Output (50-Watt Class) Four-Channel Car Stereo BTL Power Amplifier IC Series
|
SANYO[Sanyo Semicon Device]
|
| TDA8563Q TDA8563Q/N2/S10 TDA8563Q/N2/S11 |
TDA8563Q; 2 x 40 W/2 Ohm stereo BTL car radio power amplifier with diagnostic facility
2 X 40 W/2 W stereo BTL car radio
|
Philips
|
| TSDC02IJT TS4851EIJT TS4851IJT TS4851 |
Mono 1W Speaker and Stereo 160mW Headset BTL Drivers with Digital Volume Control
MONO 1 W SPEAKER AND STEREO 160 mW HEADSET BTL DRIVERS WITH DIGITAL VOLUME CONTROL
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| TDA1557Q |
2 x 22 W BTL stereo car radio
|
Philips
|
| TDA1519B |
12 W BTL or 2 x 6 W stereo car radio power amplifier
|
NXP Semiconductors
Philips Semiconductors
|
| LA4810M |
Monolithic Linear IC Stereo/Monaural BTL Power
|
Sanyo Semicon Device
|
| LA4466 LA4465 |
BTL-OCL 12W AF Power Amp For Car Stereo Use
|
SANYO[Sanyo Semicon Device]
|
| TDA7053ATD-T |
Stereo BTL audio output amplifier with DC volume control
|
NXP SEMICONDUCTORS
|
| TDA8946 |
2 x 15 W stereo Bridge Tied Load BTL audio amplifier
|
NXP Semiconductors
|
| TS4851 TS4851IJT |
1W LOUDSPEAKER & 2X160MW HEADSET BTL DRIVERS WITH DIGITAL VOLUME CONTROL
MONO 1 W SPEAKER AND STEREO 160 mW HEADSET BTL DRIVERS WITH DIGITAL VOLUME CONTROL
|
SGS Thomson Microelectronics
STMicroelectronics
|
| AN12979A |
Stereo BTL amplifier IC with built-in AGC (I2C bus-control correspondence)
|
Panasonic Semiconductor
|
